Manual Input Of A Gps Location (Lat/Lon) - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

8.9

MANUAL INPUT OF A GPS LOCATION (LAT/LON)

You may send the latitude and longitude of your vessel manually even if the
GX2200E is located in an area where GPS reception is limited.
After the position is entered, transmitting a DSC distress, position request, or
position report will contain the manually entered position.
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " GPS SETUP "
menu.
3. Press the
" POSITION INPUT " with the CH knob.
4. Press the
will beep, and the display will be as shown
in the illustration on the right.
5. Enter the latitude/longitude of your vessel
and your local UTC time in the 24-hour
notation by the CH knob. Rotate the CH
knob to select the number and press the
soft key to move the cursor to the
next character. You may backspace the
cursor by pressing the
you make a mistake.
6. Press and hold the
7. Press the
GX2200E
key until " Setup
CALL
MENU
soft key, then select
soft key. The transceiver
soft key, if
soft key to store the selected setting.
soft key two times to return to radio operation.
-POS/POS Time Input-
Position: -- --.---_
- -- --.---_
POS Time:--:--[UTC]
ENT BACK QUIT
50 37.660
000 55.989
10:00
Page 77