Transmitting A Position Request To Another Vessel - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

5. Press the
6. Press the

8.7.2 Transmitting a Position Request to Another Vessel

Position Request using the Individual/Position Directory
1. Press the
appear.
2. R o t a t e t h e C H k n o b t o s e l e c t " P O S
REQUEST ", then press the
3. Rotate the CH knob to select a name that
was stored in the individual/position direc-
tory.
Press the
vidual other than those on the display.
4. Press the
soft key to transmit the position
request DSC call.
5. When the GX2200E receives the position
from the polled vessel it is shown on the
radio display and also transferred to a GPS
chart plotter with NMEA DSC and DSE
sentences.
6. Press the
If the GX2200E does not receive a position data from the polled
vessel, the display will show "NO POSITION DATA."
Position Request by Manually Entering an MMSI
This feature allows you to request the position of a vessel by manually enter-
ing the MMSI of the ship you want to ask the position.
1. Press the
appear.
2. R o t a t e t h e C H k n o b t o s e l e c t " P O S
REQUEST ", then press the
3. Press the
GX2200E
soft key to store the selected setting.
soft key two times to return to radio operation.
key. The " DSC Menu " will
CALL
MENU
soft key to select an indi-
soft key, then press the
soft key to return to radio operation.
key. The " DSC Menu " will
CALL
MENU
soft key.
soft key.
NOTE
soft key.
Page 69