Standard Horizon QUANTUM GX2360S Supplementary Manual

9.3 PA/FOG OPERATION
When the RAM+ is connected to the
30W Public address, 4 fog horns, bells, and whistles.
9.3.1 Operating the PA / Hailer
1. Press and hold the [
[ ] key.
2. Press the [
3. Press the
4. To turn up the PA Volume, press the
the [ ] or [ ] keys to adjust the Audio output level. The
level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the [
desired listen back volume.
To exit from the PA Hailer mode, press the [
or [ ] key.
9.3.2 Operating the FOG Horn
The
Horn, Siren, Aground and Anchor signals.
FOG 1: POWER BOAT UNDERWAY
FOG 2: POWER BOAT STOPPED
FOG 3: SAIL BOAT, FISH VESSEL, TOW VESSEL
FOG 4: VESSEL UNDER TOW
1. Press and hold the [
or [ ] key.
2. Press the [
3. Select the one of the eight functions described above with
the [ ] or [ ] key and press the [
4. On the "
activate the tone through the HAIL/PA speaker.
Press the [ ] or [ ] keys to adjust the Audio output level.
The level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the [
desired listen back volume.
To exit from the FOG or other signaling mode, press the [
[ ] , or [
Page 60
] key then select PA with the [ ] or
] key.
switch and speak into the microphone.
] Key, then press the [ ] or [ ] key to the
is capable of sending 4 pre-programmed fog signals and also
] key then select FOG with the [ ]
] key.
" and " " modes, press the
] Key, then press the [ ] or [ ] key to the
] key.
it is capable of controlling the
switch and press
] , [ ] ,
] key.
switch to
] ,