Receiving An Individual Call - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

9. Rotate the CH knob to select the nature of
call (" ROUTINE ", " SAFETY ", or " URGENCY "),
then press the
10. Rotate the CH knob to select the operating
channel you want to communicate on, then
press the
11. Press the
individual DSC signal.
12. W hen an individual call acknowledgment is
received, the established channel is auto-
matically changed to the channel which is
selected on step 10 above and a ringing
tone sounds.
13. Press the
channel to make sure it is not busy, then
press the microphone's PTT switch and talk
into the microphone to the other vessel.

8.5.5 Receiving an Individual Call

When an individual DSC call is received from another vessel, a ringing alarm
sounds and the calling vessel's information will be shown in the display.
Operation and transceiver function differs depending on " Individual
Reply " in the " DSC Setup " menu setting as below:
Automatic reply:
1. When an individual call is received, an individual
call ringing alarm sounds.
The radio automatically switches to the requested
channel. The display shows the MMSI of the
vessel calling.
2. Press any key to stop the alarm.
3. Press the microphone's PTT switch and talk into
the microphone to the other vessel.
4. Press the
GX2200E
soft key.
soft key.
soft key to transmit the
soft key to listen to the
soft key to return to radio operation.
-Individual Call-
Name:
ID:345678901
Category:Routine
CH: 08
Transmit?
YES QUIT
06
25.0
123
50 37.660
000 55.989
12:56
Page 59