Dsc Test Call By Manually Entering An Mmsi - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

8.11.3 DSC Test Call by Manually Entering an MMSI

1. Press the
appear.
2. Rotate the CH knob to select " DSC TEST ",
then press the
3. Rotate the CH knob to select " MANUAL " and
press the
4. Rotate the CH knob to select the first digit
in the MMSI and press the
5. Repeat step 4 until all the numbers of the
MMSI are shown on the display.
6. Press and hold the
the test call page.
7. Press the
DSC test call to the other vessel.
8. Press the
operation.
After the radio receives a test call reply from
the vessel that was called, the radio will ring
and show "TEST ACK" display, which confirms
the radio you called received the test call.
GX2200E
key. The " DSC Menu " will
CALL
MENU
soft key.
soft key.
soft key to show
soft key to transmit the
soft key to return to radio
soft key.
Input MMSI
ID:345678901
SELECT
NOTE
-Test Call-
Input MMSI
ID:---------
-Test Call-
SELECT BACK
BACK QUIT
Received TEST ACK
Name:
ID:345678901
Category:Routine
Since: 00:25
QUIT
Page 81
QUIT