Enabling The Individual Call Acknowledgment; Transmitting An Individual Call - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

8.5.3 Enabling the Individual Call Acknowledgment

The radio can select either reply message "Able" (default) or "Unable" when
the individual reply setting (described in the previous section) is set to
"AUTOMATIC".
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " DSC SETUP "
menu.
3. Press the
" INDIVIDUAL ACK " with the CH knob.
4. Press the
5. Rotate the CH knob to select " ABLE TO
COMPLY " or " UNABLE ".
6. Press the
selected setting.
7. Press the

8.5.4 Transmitting an Individual Call

This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to another
channel.
Individual Call using the Individual/Position Directory
1. Press the
2. Rotate the CH knob to select " INDIVIDUAL ".
(To cancel, press the
3. Press the
will beep, and the last individual calls will
appear.
4. Rotate the CH knob to select an individual
you want to contact.
Press the
vidual other than those on the display.
5. Press the
C H k n o b t o s e l e c t t h e n a t u r e o f c a l l
(" ROUTINE ", " SAFETY ", or " URGENCY ").
GX2200E
key until " Setup
CALL
MENU
soft key, then select
soft key.
soft key to store the
soft key two times to return to radio operation.
key. The " DSC Menu " will appear.
CALL
MENU
soft key. The transceiver
soft key to select an indi-
soft key, then rotate the
soft key.)
-DSC Setup-
Individual Directory
Individual Reply
INDIVIDUAL ACK
Individual Ring
Group Directory
Position Reply
SELECT QUIT
Page 57