Simplex/Duplex Channel Use; Display Type - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

7.4

SIMPLEX/DUPLEX CHANNEL USE

Refer to the VHF MARINE CHANNEL CHART (Page 130) for instructions on
use of simplex and duplex channels.
All channels are factory-programmed in accordance with FCC (USA),
Industry Canada (Canada), and International regulations. Mode of
operation cannot be altered from simplex to duplex or vice-versa.
7.5

DISPLAY TYPE

The GX2200E display can be setup to show displays other than the default
"NORMAL" VHF display by using the procedure below:
1. Press and hold the
appears, then select " GENERAL SETUP " with the
CH knob.
2. Press the
knob to select " DISPLAY ".
3. Press the
4. Rotate the CH knob to select desired screen
" NORMAL ", " AIS ", " COMPASS ", " WAYPOINT ", or " GPS
STATUS ".
5. Press the
setting.
6. Press the
radio operation.
25.0
123
50 37.660
000 55.989
12:56
"norMaL" D
 1: By default the COG in "NORMAL" and "COMPASS" displays and BRG in "AIS", "COMPASS",
and "WAYPOINT" displays are set to "True", however this may be change to magnetic by
following the steps in section "5.10 CHANGING COG TO TRUE OR MAGNETIC".
Page 34
key until " Setup Menu "
CALL
MENU
soft key, then rotate the CH
soft key.
soft key to store the selected
soft key two times to return to
 1
"aiS" D
iSpLay
16
N
300
W E
18.0
50 37.660
S
000 55.989
20 12:56
"Waypoint" D
iSpLay
NOTE
16
300
12.0
50 37.660
000 55.989
20 12:56
 1
iSpLay
0
1
000 55.989
"gpS StatuS" D
16
N
25.0
W E
123
50 37.660
S
000 55.989
12:56
"CoMpaSS" D
iSpLay
0 0 1 1 1 1 2 2 2
4 8 1 6 7 9 0 3 8
50 37.660
10:00
iSpLay
 1
GX2200E