Saving A Position Report As A Waypoint; Navigating To A Saved Waypoint; Waypoint Directory - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

8.8.5 Saving a Position Report as a Waypoint

The GX2200E can save a position report call in the radio's memory as a
waypoint.
1. After the position report call has been
received, press the
2. Rotate the CH knob to change the first
letter in the name of the waypoint and press
the soft key.
3. Repeat step 2 until the WPT name is
entered.
4. Press and hold the
the waypoint into memory.

8.8.6 Navigating to a Saved Waypoint

1. Press and hold the
Menu " appears.
2. Select " GENERAL SETUP " with the CH knob.
3. Press the
" DISPLAY " with the CH knob.
4. Press the
5. Rotate the CH knob to select " WAYPOINT "
and press the
6. Rotate the CH knob to select the waypoint
name and press the
7. Press the
display and to navigate to the waypoint.
The display indicates the distance and
direction of the saved waypoint, and also
the compass indicates the saved waypoint
by dot (  ) .
To stop the navigation to a saved waypoint, perform the steps 1 to 5 above,
except selecting " NORMAL " in the step 5.
GX2200E
soft key.
soft key to save
key until " Setup
CALL
MENU
soft key, then select
soft key
soft key.
soft key.
key so show the compass
123456789
01:03
123456789
000 38.223

-Waypoint Directory-

Swim Point
FISHING PT
Port
SELECT QUIT
000 38.223
N
W E
S
000 55.989
20
50 51.357
50 51.357
16
300
18.0
50 37.660
12:56
Page 75