Scrambler Setup - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

10.7 SCRAMBLER SETUP

Operates only when the optional CVS2500A is installed. This menu
will not appear unless a CVS2500A is installed.
1. Press and hold the
appears.
2. Rotate the CH knob to select " CH FUNCTION
SETUP ".
3. Press the
with the CH knob.
4. Press the
5. Rotate the CH knob to select the channel to be
scrambled and press the
6. Rotate the CH knob to select the scrambler code.
The scrambler code can be set from " 0 " to " 3 " and
" Off ". When " Off " is selected the voice scrambler
is disabled.
7. Press the
8. Repeat steps 5 through 7 to set other channels.
9. Press the
GX2200E
NOTE
key until " Setup Menu "
CALL
MENU
soft key, then select " SCRAMBLER "
soft key.
soft key.
soft key to store the selected code.
soft key three times to return to radio operation.
Page 99