Receiving A Dsc Position Report Call; Navigating To A Position Report; Stopping Navigation To A Position Report - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

8.8.2 Receiving a DSC Position Report Call

When another vessel transmits their vessels location to the GX2200E the
following will happen:
1. A ringing sound will be produced when the call is
received and NMEA sentences (DSC, DSE) are
outputted so the position can be shown on a chart
plotter or a computer.
2. Press any key to stop ringing.
3. Rotate the CH knob to see position information of the station.
4. To exit to radio mode, press the

8.8.3 Navigating to a Position Report

The GX2200E has a feature that allows navigation to a received position
report call by using the compass display. Navigating to the position of a posi-
tion report call may be enabled by the procedure below.
1. After the position report call has been
received, press the
2. To start navigating using the compass
display, press and hold the
until the compass page is shown. The
display indicates the distance and direction
o f t h e r e c e i v e d v e s s e l , a n d a l s o t h e
compass indicates the received vessel by
dot (  ) .

8.8.4 Stopping Navigation to a Position Report

1. Press one of the soft keys to show the key selec-
tions.
2. Press the
ing to a the waypoint and the Normal VHF display
will be shown.
Page 74
soft key.
key. The radio will stop navigat-
soft key.
soft key
123456789
01:03
123456789
01:03
123456789
50 51.357
000 38.223
16
N
300
W E
18.0
50 37.660
S
000 55.989
20 12:56
16
N
300
W E
18.0
50 37.660
S
000 55.989
GX2200E