Atis Code Programming - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

15.2 ATIS CODE PROGRAMMING

1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " ATIS SETUP ".
3. Press the
CODE " with the CH knob.
4. Press the
5. Rotate the CH knob to select the first
number of your ATIS, then press the
soft key to step to the next number. If a
mistake was made entering in the name
repeatedly press the
wrong character is selected, then rotate the
CH knob to correct the entry.
6. Repeat step 5 to set your ATIS (ten digits).
7. When finished programming the ATIS
number, press and hold the
The radio will ask you to input the ATIS
number again. Use steps 5 and 6 above,
then press and hold the
6. Press the
number in memory.
7. Press the
radio operation.
GX2200E
key until " Setup
CALL
MENU
soft key, then select " ATIS
soft key.
key until the
soft key.
soft key to store the ATIS
soft key twice to return to
soft key.
Page 123