International, Usa, And Canada Mode; Dual Watch (To Channel 16) - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

When the " GPS STATUS " mode is selected in step 4 above, the
display will show the GPS status until a key is pressed.
7.6

INTERNATIONAL, USA, AND CANADA MODE

To change the channel group from International to USA or Canada:
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " CH FUNCTION
SETUP ".
3. Press the
CH knob to select " CH GROUP ".
4. Press the
5. Rotate the CH knob to select desired chan-
nel group " INTL ", " USA ", or " CAN ".
6. Press the
selected setting.
7. Press the
7.7

DUAL WATCH (TO CHANNEL 16)

Dual watch is used to scan two channels for communications. One channel
is a normal VHF channel and the other is the priority, Channel 16. When a
signal is received on the normal channel the radio briefly switches between
the normal channel and Channel 16 to look for a transmission. If the radio
receives communications on Channel 16 the radio stops and listens to Chan-
nel 16 until communication ends and then starts dual watch scan again.
1. Adjust the SQL knob until the background noise disappears.
2. Rotate the CH knob to select a channel you wish to watch.
3. Press one of the soft keys, then press the
The radio will monitor CH16 and the channel that
was selected in step 2.
If a transmission is received on the channel
selected in step 2, the GX2200E will dual watch
to CH16.
4. To stop dual watch, press one of the soft keys, then press the
soft key again.
GX2200E
NOTE
key until " Setup
CALL
MENU
soft key, then rotate the
soft key.
soft key to store the
soft key two times to return to radio operation.
-CH Group-
GROUP 1:USA
Group 2:INTL
Group 3:CAN
ENT
soft key.
25.0
123
50 37.660
000 55.989
12:56
Page 35
QUIT