Deleting A Waypoint; Saving A Dsc Position Call As A Waypoint; Navigating To A Saved Waypoint - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

13.4 DELETING A WAYPOINT

1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " WAYPOINT
SETUP ".
3. Press the
" WAYPOINT DIRECTORY " with the CH knob.
4. Press the
" DELETE " with the CH knob.
5. Press the
CH knob to highlight the waypoint to be
deleted.
6. Press and hold the
radio beeps and the waypoint directory is
removed from the display.
7. Press the

13.5 SAVING A DSC POSITION CALL AS A WAYPOINT

When a position is received from another DSC radio the GX2200E allows the
position to be saved as a waypoint.
Refer to section "8.8.5 Saving a Position Report as a Waypoint" for
details.

13.6 NAVIGATING TO A SAVED WAYPOINT

The GX2200E can navigate to a saved waypoint using the compass display.
Refer to section "8.8.6 Navigating to a Saved Waypoint" for details.
GX2200E
key until " Setup
CALL
MENU
soft key, then select
soft key, then select
soft key, then rotate the
soft key until the
soft key three times to return to radio operation.
-Waypoint Directory-
Swim Point
FISHING PT
Port
SELECT QUIT
Page 115