Setting Up The Individual Call Ringer - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

8.5.6 Setting up the Individual Call Ringer

When an individual call is received the radio will produce a ringing sound for
2 minutes. This selection allows the individual call ringer time to be changed.
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " DSC SETUP "
menu.
3. Press the
" INDIVIDUAL RING " with the CH knob.
4. Press the
5. Rotate the CH knob to select ringing time of
individual calls.
6. Press the
selected setting.
7. Press the
return to radio operation.
The GX2200E has the capability to turn off the individual call ringer.
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " DSC SETUP "
menu.
3. Press the
BEEP " with the CH knob.
4. Press the
5. Rotate the CH knob to select " Individual ",
then press the
6. Rotate the CH knob to select " Off ".
7. Press the
selected setting.
8. Press the
To re-enable the ringer tone, repeat the above procedure, rotating the CH
knob to select " On " in step 6 above.
GX2200E
key until " Setup
CALL
MENU
soft key, then select
soft key.
soft key to store the
soft key two times to
key until " Setup
CALL
MENU
soft key, then select " DSC
soft key.
soft key.
soft key to store the
soft key three times to return to radio operation.
-DSC Setup-
Individual Directory
Individual Reply
Individual Ack
INDIVIDUAL RING
Group Directory
Position Reply
SELECT QUIT
-DSC Beep-
Select Call
Individual
Beep
On
ENT QUIT
Page 61