Channel Name - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

10.6 CHANNEL NAME

When the radio ("Normal") mode is selected, the display will show a name
under the channel number. This name describes the use of the channel. The
radio has the capability to customize the name by the procedure below.
Example: CH69 PLEASURE to HOOKUP
1. Press and hold the
appears.
2. Rotate the CH knob to select " CH FUNCTION
SETUP ".
3. Press the
with the CH knob.
4. Press the
5. Rotate the CH knob to select the channel to be
named, then press the
6. Rotate the CH knob to scroll through the first
letter of the new channel name.
7. Press the
in the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to 16 characters, if
you do not use all 16 characters press the
soft key to move to the next space. This method
can also be used to enter a blank space in the
name. If a mistake was made entering in the
name repeatedly press the
wrong character is selected, then rotate the CH
knob to correct the entry.
9. Press and hold the
10. If you want to enter the name of another channel, repeat the steps 5
through 9.
11. Press the
Page 98
key until " Setup Menu "
CALL
MENU
soft key, then select " CH NAME "
soft key.
soft key.
soft key to store the first letter
soft key to save the name.
soft key three times to return to radio operation.
key until the
-CH Name-
Select CH
16
CH Name
DISTRESS
ENT QUIT
-CH Name-
Select CH
69
CH Name
HLEASURE
ENT BACK QUIT
-CH Name-
Select CH
69
CH Name
HOOKUP
ENT BACK QUIT
GX2200E