Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual page 60

Manual reply:
1. When an individual call is received, an individual
call ringing alarm sounds.
The display shows the MMSI of the vessel trans-
mitting the individual call and the radio will change
to the requested channel after 10 seconds.
2. Press any key to stop the alarm.
3. Monitor the requested channel until the message
is completed.
On the display you will notice 3 soft key selec-
tions. These selections are described below:
: Press this key to accept the DSC individ-
ual call and to switch to requested channel.
Note: If a key is not pressed for 30 seconds or longer the radio will auto-
matically change to the requested channel.
: Press this key to temporarily disable automatic switching to the
requested channel.
Note: In some cases automatically switching to a requested chan-
nel might disrupt import ongoing communications. This feature allows
commercial users to suspend channel switching and stay on the working
channel selected before the all ships call was received.
: Press this key to quit the automatic channel switching and revert
to the last selected working channel.
4. Press the
When there is an unread individual call, "
display. You may review the unread individual call from the DSC log,
refer to the section "8.13.3 Reviewing Other Logged Calls."
Page 60
key to return to the channel display.
NOTE
25.0
123
50 37.660
000 55.989
12:56
" icon will appear on the
06
GX2200E