Manual Inputting Of The Gps Location ( Lat/Lon ) - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

9.11 MANUAL INPUTTING OF THE GPS LOCATION ( LAT/LON )

You may send the Latitude/Longitude of your vessel manually when a GPS
receiver is not connected or is not functioning.
After the position is entered, transmitting a DSC distress or position report
will contain the manually entered position.
1. Press and hold the
" SETUP MENU " appears.
2. Press the
INPUT " menu.
3. Press the
will be as shown in the illustration on the
right.
4. Enter UTC time in the 24-hour format.
Use the
soft key to navigate to each column of
the time, then use the
select the desired numbers in each
column. Repeat for each column, to
complete the time.
5. Enter the latitude and longitude of your
vessel location with the same procedure
as description above.
6. To store the data entered, press and
hold the
menu and return to radio mode press
the soft key.
GX1200E
key until the
keys to select " POS
/
soft key. The display
soft key and the
/
soft key. To exit this
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
DSC SETUP
-POS INPUT-
UTC: --:--
LAT: --˚--.-
LON:---˚--.-
keys to
-POS INPUT-
UTC: 12:35
LAT: 33˚34.N
LON:118˚08.W
-SETUP MENU-
CH FUNC SETUP
DSC SETUP
POS INPUT
-POS INPUT-
UTC: 12:35
LAT: --˚--.-
LON:---˚--.-
Page 69