Table of Contents
Advertisement
12.11 MANUAL INPUTTING OF THE GPS LOCATION ( LAT/LON )
You may send the Latitude/Longitude of your vessel manually when a GPS
receiver is not connected or is not functioning.
After the position is entered, transmitting a DSC Distress or Position Send will
contain the manually entered position.
1. Press and hold down the
"SETUP MENU" appears.
2. Press the
PUT" menu.
3. Press the
the display will be as shown in the illustration on
the right.
4. Enter the time in 24 hour format on the UTC
time. Use the
L ] key to navigate to each column of the
time, then use the
the desired numbers in each column. Re-
peat for each column, to complete the time.
5. Enter the Latitude/Longitude of your vessel
location with the same procedure as de-
scription above.
6. To store the data entered, press the
exit this menu and return to radio mode press the
key.
GX1150
key until the
/
keys to select "POS IN-
key. The transceiver will beep, and
and the microphone's [ H/
/
keys to select
key. To
Page 59
Advertisement
Table of Contents
