Tcpa Alarm - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

12.3.4 TCPA Alarm

This function allows you to set the TCPA (Time to Closest Point of
Approach) alarm.

: Setting up a TCPA alarm sets a time point where the radio will alarm when
an AIS equipped vessel approaching within the time selected.
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " AIS / COMPASS
SETUP ".
3. Press the
ALARM " with the CH knob.
4. Press the
5. Rotate the CH knob to select the time that
the TCPA alarm will sound.
6. Press the
CH knob to set the alarm item to " On ".
7. Press the
selected setting.
8. Press the
The alarm will sound until it is disabled (1) by pressing any key, (2)
following the steps above and selecting " Off " in step 6, or (3) when
the ship is out of the selected TCPA alarm distance. The alarm is
produced from the front panel speaker, the speaker in the mic, the
optional external speaker and optional RAM3 mic when connected.
Page 110
key until " Setup
CALL
MENU
soft key, then select " TCPA
soft key.
soft key, then rotate the
soft key to store the
soft key two times to return to radio operation.
NOTE
GX2200E