Ais Operation - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

12.2 AIS OPERATION

The GX2200E is equipped with an AIS receiver and can display AIS targets
around your vessel on the radios display. Therefore, you can identify and
avoid other large vessels nearby your vessel.
To show AIS targets on the radio's display, the internal or external
GPS needs to be fixed own location so the radio knows its position
relative to the AIS targets.
1. Press the
The AIS display shows your vessel as a triangle
in the center of the display. AIS targets are shown
as circles. The line projected from the circle is the
AIS vessels course over ground (COG).
2. Press one of the soft keys, then press the
soft key to show a list of AIS vessels being
received.
Note: Up to 15 AIS targets can be shown on the
display.
3. Rotate the CH knob to select the MMSI number (or
v e s s e l n a m e ) . T h e s e l e c t e d A I S t a r g e t i s
displayed with " " icon, while other stations are
displayed with " " icon.
4. Press one of the soft key, then press the
mation of the AIS target.
Note: When the "LIST" and "INFO" pages are shown, the radio will
update every ten seconds, so it may take some time to show the vessels
names to be displayed instead of the MMSI and update the navigation
information of each ship. The AIS output of the GX2200E is updated in
realtime as transmissions are received from the AIS equipped ships.
5. To see AIS information of another AIS target, press the
GX2200E
key to show the AIS screen.
AIS
NOTE
INFO
V e s s e l L o c a t i o n
A I S T a r g e t
50 37.660
000 55.989
20
S e l e c t e d A I S T a r g e t
R a n g e R i n g
50 37.660
000 55.989
key to show more infor-
soft key.
Page 105
16
300
12.0
12:56
16
300
12.0