Assigning Soft Keys - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

Key
Press to CLEAR a function or menu selection.
Secondary use
Press and hold the
mode from International to USA or Canadian.
Key
This key functions as the enter key.
Speaker
The internal speaker is located here.
Key
DISTRESS
This key is used to send a DSC distress call. Refer to section "8 DIGITAL
SELECTIVE CALLING (DSC)".

16.2 ASSIGNING SOFT KEYS

This menu item allows selection of the number of soft keys, soft key selec-
tion and how long the display will show the soft key icon after a soft key is
pressed. The keys maybe setup to control the following functions:
DISPLAY
DIMMER
SCAN
DW
IC
PA/FOG
CPS: COMPASS
WPT
AIS
AIS AL
PRESET
MARK
PSET 0 - PSET 9
Page 126
key while pressing the
Select the menu for the display and key back light intensity
Starts and stops scanning.
Starts and stops dual watch scan.
Activates intercom between radio and RAM3 mic.
Activates the PA / Fog Horn function.
Shows the "Compass" display.
Shows the "Waypoint" navigation display.
Shows the "AIS" display.
Toggles the AIS alarm "on" and "off".
Porgrams or deletes the preset memory channel. Refer to section 8.10 for
operations.
Mark the current position for a "Waypoint".
Immediately recalls the preset memory channel. Refer to section 8.10 for operations.
key to change the
FUNCTION
GX2200E