Cmp30 ( Ram3 ) Remote Mic Operation; Remote Mic Controls - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

16 CMP30 ( RAM3 ) REMOTE MIC OPERATION

When a remote microphone is connected to the GX2200E, all VHF, DSC,
setup menus, AIS, Waypoint, Compass functions and PA/Fog modes can be
remotely operated. The CMP30's operation is same as GX2200E except the
receiver audio volume setting and squelch level setting. The reason for the
same operation is to make the operation of the radio and CMP30 mic easy.
For specific operation of the CMP30 mic review sections in the radio manual.
The CMP30 is supplied with 7 m of routing cable and can be extended up to
21 m using three 7 m extension cables model CT-100. The Intercom feature
can be used between the CMP30 and the GX2200E. In addition, speaker
wires are supplied at the panel mount of the routing cable for external speak-
ers to be connected in noisy environments.

16.1 REMOTE MIC CONTROLS

Key
Toggles between high and low power. When the
the transceiver is on CH13 or CH67, the power is temporarily switched
from LO to HI until the PTT switch is released. The
tion on transmit inhibited and low-power only channels.
Page 124
key is pressed while
key does not func-
GX2200E