Maintenance; Replacement Parts; Factory Service - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

17 MAINTENANCE

The inherent quality of the solid-state components used in this transceiver
will provide many years of continuous use. Taking the following precautions
will prevent damage to the transceiver.
• Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
• Ensure that the supply voltage to the transceiver does not exceed 16
VDC or fall below 11 VDC.
• Use only STANDARD HORIZON-approved accessories and replacement
parts.
In the unlikely event of serious problems, please contact your Dealer or our
repair facility.

17.1 REPLACEMENT PARTS

Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from your Dealer.
Commonly requested parts, and their part numbers are listed below.
• Power Cord: T9025406
• VOL and SQL Knob: RA116800B (White), RA116810A (Black)
• CH Knob: RA116780A (White), RA1167900 (Black)
• Mounting Bracket: RA078410C (White), RA078400B (Black)
• Mounting Bracket Knob: RA0978500 (White), RA0978600 (Black)
• Microphone Hanger: RA0436000 (White), RA0458800 (Black)
• RAM3 Mic Routing Cable Assembly: S8101512
• Dust Cover: RA128810A (White only)

17.2 FACTORY SERVICE

In the unlikely event that the radio fails to perform or needs servicing, please
contact your Dealer.
An "RA" (Return Authorization) number is not necessary to send a product
in for service. Include a brief note describing the problem along with your
name, return address, phone number, and proof of purchase.
Page 128 GX2200E