Operating The Fog Horn Mode - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

When in the PA HAIL mode it is possible to simultaneously use the
AIS page by pressing the

7.10.2 Operating the FOG HORN mode

The user can select the type of horn from "Underway", "Stop", "Sail", "Tow",
"Aground", "Anchor", "Horn", and "Siren".
1. Press one of the soft keys, then press the
soft key.
Note: The
pressed to see the
have not be customized.
2. Rotate the CH knob to select " FOG ", then press
the soft key.
3. Rotate the CH knob to select one of the eight
functions described above.
4. Press the
5. On the " Horn " and " Siren " modes, press the PTT
switch to activate the tone through the HAIL/PA
speaker.
Rotate the CH knob to control the AF output level. The AF output level
can be set from 0 to 30 watts.
6. To listen back, rotate the PWR/VOL knob.
7. To exit the FOG HORN mode, press the
When in the FOG HORN mode it is possible to simultaneously use
the AIS page by pressing the
GX2200E
NOTE
key.
AIS
soft key may have to be
soft key if the soft keys
PA/FOG
soft key.
NOTE
AIS
PA/FOG
000 55.989
key.
CLR
WX
key.
16
16
50 37.660
12:56
Page 41