Creating A Standard Log - GE DigitalFlow GF868 Programming Manual

Chapter 3. Logging Data

3.2 Creating a Standard Log

STD
Use the submenu to create a new standard log and to select the parameters to log, the log start time and date, the log
end time and date, and the time increment. Also, any log file already stored in memory may be inspected and/or
changed.
Press the appropriate side of the
following steps:
1. To access the Log Menu, press the
a. If you have activated the security feature (see Chapter 1, Programming Site Data, page 35 for details), enter the
assigned password and press
[F1] STD
2. Press = .
3. Use the [, [ and
to 5 characters) and press
Note: At the
NAME
prompt, the option bar will show the names of all completed or active log files that are currently
stored in memory. Recall that a flashing asterisk (*) appears at the far right of the locator bar if the Model
GF868 is currently logging data (see Chapter 3, Operation, of the Startup Guide).
4. At the Log Message prompt, enter a brief description (up to 21 characters) of the log. Press
5. Use the [, [ and
options.
IMPORTANT:
Only the first parameter logged may be graphically displayed in the
Keep this in mind when selecting a parameter. See Chapter 2, Displaying Data, for instructions.
52
[SCREEN]
key to activate the desired pane of the display screen, and complete the
[LOG]
key.
[ENT]
.
[F1]-[F4]
keys to inspect a completed log or to change an active log, or enter a new name (up
[ENT]
to create a new log file.
[F1]-[F4]
keys to select the first parameter to be logged. See Table 16 for a list of the available
Table 16: Measurement Parameter Options
Option Bar Choice
[F1] VEL
=
[F2] VOLUM
=
[F3] +TOTL
=
[F4] -TOTL
=

[ + [F1] MDOT
=

[ + [F2] +MASS
=

[ + [F3] -MASS
=

[ + [F4] DIAG
=
Description
Flow Velocity
Volumetric Flow
Forward Totalized Volume Flow
Reverse Totalized Volume Flow
Mass Flow
Forward Totalized Mass Flow
Reverse Totalized Mass Flow
Diagnostic
DigitalFlow™ GF868 Programming Manual (2-Channel)
[ENT]
.
LOG
Submenu of the Display Menu.