Configuring Pppoe Settings - Cisco SPA 501G Administration Manual

Configuring Security, Quality, and Network Features
Configuring Domain and Internet Settings
STEP 5
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Click Submit All Changes.
For the SPA501G, can be configured using the IVR. See the
Cisco SPA 501G IP Phone" section on page

Configuring PPPoE Settings

If you configured PPPoE as the internet connection type:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the System tab.
Configure the following fields:
Parameter
PPPoE Login Name
PPPoE Login Password
PPPoE Service Name
Click Submit All Changes.
17.
Description
Specifies the account name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
5
"Using IVR on the
123