Configuring Security, Quality, and Network Features
Setting Optional Network Parameters
Setting Optional Network Parameters
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Log in to the web administration interface.
Click Admin Login and advanced.
Click the System tab.
Configure the following fields:
Parameter
Host Name
Domain
Primary DNS
Secondary DNS
DNS Server Order
DNS Query Mode
Description
The host name of the phone.
The network domain of the phone. However, if using
LDAP, see
Configuring Lightweight Directory Access
Protocol (LDAP) for the Cisco SPA 500 Series,
page
68.
DNS server used by the phone in addition to DHCP
supplied DNS servers if DHCP is enabled; when DHCP
is disabled, this is the primary DNS server.
Defaults to 0.0.0.0.
However, if using LDAP, see
Directory Access Protocol (LDAP) for the Cisco SPA
500 Series, page
68.
DNS server used by the phone in addition to DHCP
supplied DNS servers if DHCP is enabled; when DHCP
is disabled, this is the secondary DNS server.
Defaults to 0.0.0.0.
Specifies the method for selecting the DNS server. The
options are Manual, Manual/DHCP, and DHCP/Manual.
Do parallel or sequential DNS Query. With parallel DNS
query mode, the phone sends the same request to all
the DNS servers at the same time when doing a DNS
lookup, the first incoming reply is accepted by the
phone.
Defaults to parallel.
Not available on WIP310.
5
Configuring Lightweight
124