Pppoe Settings; Optional Network Configuration - Cisco SPA 501G Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference
System Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
LAN MTU
Ethernet MTU (SPCP)
Duplex Mode

PPPoE Settings

Parameter
PPPoE Login Name
PPPoE Login Password
PPPoE Service Name

Optional Network Configuration

Parameter
Host Name
Description
LAN Maximum Transmission Unit size. Default value:
1500.
Ethernet Maximum Transmission Unit size. Default
value: 1500.
Duplex Mode—Choose one of the following to
configure the speed/duplex for the phone's Ethernet
ports:
•
Auto
•
10MBps/Duplex
•
10MBps/Half
•
100Mbps/Duplex
•
100MBps/Half
Description
Specifies the account name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Description
The host name of the IP phone.
B
205