Cisco SPA 501G Administration Manual page 175

Configuring Regional Parameters and Supplementary Services
Localizing Your IP Phone
NOTE
STEP 1
STEP 2
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Defaults to blank; the maximum number of characters is 512. For example:
<Language_Selection ua="na"> Spanish
</Language_Selection>
During startup, the phone checks the selected language and downloads the
dictionary from the TFTP/HFTP provisioning server indicated in the phone's
configuration. The dictionaries are available at the support website. See
Appendix C, "Where to Go From Here,"
Currently dictionaries are available for the following languages:
• English
• Spanish
• German
• Dutch
• Italian
• French
• Portuguese
• Danish
• Swedish
• Czech
• Slovak
For language selection, the following character sets are supported: Latin2 (Czech,
Hungarian, Polish, Romanian, Croatian, Slovak, Slovenian, Serbian), Cyrillic (Russian,
Bulgarian, Ukrainian and others), and Latin5 (Turkish).
The phones officially support the ISO-8859-1 to 8859-16 character sets, which
encompass all Eastern and Western European languages.
The end user can change the language of the phone on the phone by following
these steps:
Press the Setup button.
Select Language, then press the Select soft button.
for the website location.
7
164