Cisco SPA 500 Series and Wireless IP Phone Field Reference
User Tab
NOTE
NOTE
NOTE
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Defaults to blank.
Speed dial configuration has its own tab on the Cisco SPA 525G and does not
appear in this section on the WIP310. Speed dial configuration from the WIP310 is
done on the phone. You can also configure speed dials on the Cisco SPA 500 Series
IP phones; see the User Guide for the phone for more information.
Supplementary Services
The IP phone provides native support of a large set of enhanced or
supplementary services. All of these services are optional. Most supplementary
service parameters are listed in
The user can enable or disable supplementary services and other settings in this
section.
A supplementary service should be disabled if the user has not subscribed for it,
or the service provider intends to support similar service using other means.
For more star code or supplementary service information, see
Supplementary Services (Star Codes), page
Web Information Service Settings (Cisco SPA 525G)
These parameters apply only to the Cisco SPA 525G.
For configuration information, see
525G IP Phone, page
Audio Volume
Does not apply to the WIP310.
Supplementary Services, page
Configuring RSS Newsfeeds on the Cisco SPA
62.
250.
Configuring
151.
B
278