Configuring The Cisco Spa 9000 For The Cisco Spa 500S; Configuring The Broadsoft Server For The Cisco Spa 500S - Cisco SPA 501G Administration Manual

Configuring the Cisco SPA 500S Attendant Console
Setting Up the Cisco SPA 500S Attendant Console
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 1
STEP 2
STEP 3
NOTE
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide

Configuring the Cisco SPA 9000 for the Cisco SPA 500S

You must still enable Computer Telephony Integration (CTI) on the Cisco SPA 9000
web UI, as shown in the following procedure:
Connect to the web UI for the Cisco SPA 9000.
Click Admin Login on the web UI page.
If necessary, enter admin and your password, then Advanced.
Click the SIP tab.
SIP Parameters
In the
Click Submit All Changes.

Configuring the BroadSoft Server for the Cisco SPA 500S

The BroadSoft server requires you to assign IP phone users to the Busy Lamp
(BLF) Monitor Users List. The BroadSoft server sends updates on the status of
each phone on this list to the Cisco SPA 500S, which subscribes for this service.
To configure the BroadSoft server to support the Cisco SPA 500S:
On the BroadSoft server, in the user profile used by the phone to register with the
BroadSoft server, select Assign Services.
On the Assign Services page, from the Available Services column, move Busy
Lamp to the User Services column.
Define the List URI used by the Cisco SPA 500S to register for BLF monitoring
service with the BroadSoft server. This value must match the value entered
following the sub = keyword (for example, cisco_list). Select the domain from
the drop-down list to match the Unit Key.
If you configure more than one monitored list on the BroadSoft server, use the vid=
keyword in each unit/keyconfiguration script to specify the phone extension to use
for each list.
section, select yes from the
CTI Enable
drop-down list.
9
181