Cisco Spa 9000 Voice System; Cisco Spa 500 Series And Wip310 Ip Phone Administration Guide - Cisco SPA 501G Administration Manual

Getting Started
Network Configurations

Cisco SPA 500 Series and WIP310 IP Phone Administration Guide

This document describes some common network configurations; however, your
configuration may vary depending on the type of equipment used by your service
provider.

Cisco SPA 9000 Voice System

The Cisco SPA 9000 Voice System is an affordable and feature-rich voice over IP
(VoIP) telephone system that is designed especially for small businesses. The
Cisco SPA 9000 Voice System uses standard TCP/IP protocols and can provide
global connectivity through any Internet Telephony Service Provider (ITSP) that
supports SIP.
At minimum, the Cisco SPA 9000 Voice System includes a Cisco SPA 9000 IP PBX
and one or more Cisco SPA 500 Series or Wireless-G IP Phones. These devices
are connected through a switch to a local area network. With an Internet
connection, the Cisco SPA 9000 Voice System can subscribe to ITSP services to
take advantage of low calling rates. With the optional Cisco SPA 400, the Cisco
SPA 9000 Voice System can connect to the Public Switched Telephone Network
(PSTN) to support legacy phone lines. The Cisco SPA 400 also provides local
voice mail service.
When you use Cisco SPA 500 Series and Wireless-G IP Phones with the Cisco
Cisco SPA 9000 Voice System, the following additional phone features are
available:
• Auto attendant for multiple extensions
• Music on hold
• Configurable call routing
• Multiple DID numbers per VoIP line
• Call hunting (sequential, round robin, random)
• Group paging
• Call parking
• Call pick up
• Group call pick up
You can configure and manage the Cisco SPA 9000 Voice System using an
Interactive Voice Response (IVR) system, the Cisco SPA 9000 Voice System Setup
Wizard, or a built-in web server. For more information, see the
Voice System Administration Guide.
1
Cisco SPA 9000
5