Configuring Security, Quality, and Network Features
Setting Optional Network Parameters
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Setting Optional Network Parameters
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Configuring PPPoE Settings
If you configured PPPoE as the internet connection type:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the System tab.
Configure the following fields:
Parameter
PPPoE Login Name
PPPoE Login Password
PPPoE Service Name
Click Submit All Changes.
Log in to the web administration interface.
Click Admin Login and advanced.
Click the System tab.
Configure the following fields:
Parameter
Host Name
Description
Specifies the account name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Description
The host name of the phone.
5
111