Customizing The Startup Screen - Cisco SPA 501G Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Information and Display Settings
STEP 5
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Enter the IP address of the voice mail server.
Click Submit All Changes.

Customizing the Startup Screen

You can create a text logo to display when the IP phone boots up. (Not applicable
to the WIP310.)
Cisco SPA 50XG:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab. In the Text Logo field, enter logo text as follows:
• Up to two lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) and escape code (%oa) between lines
For example, "Super\n%0aTelecom" will display:
Super
Telecom
Click Submit All Changes. The phone reboots.
Cisco SPA 525G:
Log in to the web administration interface.
Admin Login and advanced.
Click the User tab. In the Screen section, Text Logo field, enter logo text as follows:
• Up to two lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) and escape code (%oa) between lines
3
35