Cisco SPA 501G Administration Manual page 41

Configuring Lines and Extensions
Configuring Lines
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameters
Local Progressing
LED
Remote Progressing
LED
(applicable only to
shared call
appearance)
Local Ringing LED
Remote Ringing LED
(applicable only to
shared call
appearance)
Local Active LED
Remote Active LED
(applicable only to
shared call
appearance)
Local Held LED
Remote Held LED
(applicable only to
shared call
appearance)
Register Failed LED
Disabled LED
Description
Appears when this station attempts an outgoing call on this call
appearance (the called number is ringing).
Defaults to blank (c=r).
Appears when another station attempts an outbound call on
this shared call appearance.
Defaults to blank (c=r; p=d).
Appears when the call appearance is ringing.
Defaults to blank (c=r;p=f).
Appears when the shared call appearance is in ringing on
another station.
Defaults to blank (c=r;p=d).
Appears when the call appearance is engaged in an active call.
Defaults to blank (c=r).
Appears when another station is engaged in an active call on
this shared call appearance.
Defaults to blank (c=r;p=d).
Appears when the call appearance is held by this station.
Defaults to blank (c=r;p=s).
Appears when another station places this call appearance on
hold.
Defaults to blank (c=4,p=s).
LED pattern when the corresponding extension has failed to
register with the proxy server. Leaving this entry blank
indicates the default value of c=a.
LED pattern when the Call Appearance is disabled (not
available for any incoming or outgoing call). Leaving this entry
blank indicates the default value of c=o.
2
30