Cisco SPA 501G Administration Manual page 30

Getting Started
Using IVR on the Cisco SPA 501G IP Phone
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Number Option
181 Set the IP multicast address (used by the Cisco SPA 9000 to
communicate with the IP phone). Enter the address (use * to enter the "."
value), then press #.
To save, press 1. To review the value you entered, press 2. To re-enter,
press 3. To exit, press *.
7932 Enable or disable the web server. Press 1 to enable or 0 to disable, then
press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
723646 Enable or disables access to the administrative (admin) login on the web
interface. Press 1 to enable or 0 to disable, then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
1
19