Cisco SPA 501G Administration Manual page 81

Customizing Cisco SPA and Wireless IP Phones
Configuring Lightweight Directory Access Protocol (LDAP) for the Cisco SPA 500 Series
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
LDAP Corp Dir Name
LDAP Server
LDAP Auth Method
LDAP Client DN
LDAP Username
LDAP Password
LDAP Search Base
Description
Enter a free-form text name, such as "Corporate
Directory."
Enter a fully qualified domain name or IP address of
LDAP server, in the following format:
nnn.nnn.nnn.nnn
Enter the host name of the LDAP server if the MD5
authentication method is used.
Select the authentication method that the LDAP
server requires. Choices are:
•
None—No authentication is used between the
client and the server.
•
Simple—The client sends its fully-qualified
domain name and password to the LDAP server.
May present security issues.
•
Digest-MD5—The LDAP server sends
authentication options and a token to the client.
The client returns an encrypted response that is
decrypted and verified by the server.
Enter the distinguished name domain components
[dc] ; for example:
dc=cv2bu,dc=com
If using the default Active Directory schema
(Name(cn)->Users->Domain), an example of the
client DN follows:
cn="David Lee",dc=users,dc=cv2bu,dc=com
Enter the username for a credentialed user on the
LDAP server.
Enter the password for the LDAP username.
Specify a starting point in the directory tree from
which to search.
Separate domain components [dc] with a comma.
For example:
dc=cv2bu,dc=com
3
70