Screen (Cisco Spa 525G) - Cisco SPA 501G Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference
User Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Ringer Volume
Speaker Volume
Handset Volume
Headset Volume
Bluetooth Volume

Screen (Cisco SPA 525G)

Parameter
Screen Saver Enable
Screen Saver Type
Screen Saver Trigger
Time
Screen Saver Refresh
Time
Description
Sets the default volume for the ringer.
Sets the default volume for the full-duplex speakerphone.
Sets the default volume for the handset.
Sets the default volume for the headset.
Volume of the Bluetooth device.
NOTE Applies to the Cisco SPA 525G only.
Description
Enables a screen saver on the phone's LCD. When the phone
is idle for a specified time, it enters screen saver mode.
(Users can set up screen savers directly using phone Setup
button.) Any button press or on/off hook event triggers the
phone to return to its normal mode. (The screen shows
"Press any key to unlock your phone.") If a user password is
set, the user must enter it to exit screen saver mode.
Choose the type of screen saver:
•
Black Background—Displays a black screen.
•
Gray Background—Displays a gray screen.
•
Black/Gray Rotation—The screen incrementally cycles
from black to gray.
•
Picture Rotation—The screen rotates through available
pictures on the phone.
•
Digital Frame—Shows the background picture.
Number of seconds that the phone remains idle before
the screen saver turns on.
Number of seconds before the screen saver should refresh
(if, for example, you chose a rotation of pictures).
B
279