Understanding Basic And Advanced Views; Using The Web Administration Tabs; Roadmap To Web Ui Features - Cisco SPA 501G Administration Manual

Getting Started
Using the Web Administration User Interface
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide

Understanding Basic and Advanced Views

These views are similar, but
page. To see all available options for your login, use the

Using the Web Administration Tabs

Each tab contains different parameters. Some tasks require you to set parameters
in different tabs.
For field reference about each parameter available on the web UI, see
Appendix B, "Cisco SPA 500 Series and Wireless IP Phone Field Reference."

Roadmap to Web UI Features

The following tables provide a roadmap to features available on the web UI.
To perform these tasks...
View phone, extension, and line/call information,
including:
•
DHCP, current IP address, DNS addresses
•
Software and hardware versions
•
Broadcast, RTP, and SIP information
•
Registration state
•
Packets sent, received, lost, and other
information
Configure system-level parameters, including
network and debug parameters. To:
•
Enable the web UI and web administrator
access
•
Set the Internet connection type to DHCP
•
Configure the syslog and debug servers
•
Enable VLAN and CDP
advanced
view shows more options on each web
advanced
view.
On the web UI, click the ...
Info tab
See "Viewing Phone
Information" section on
page 17.
System tab
See Chapter 5, "Configuring
Security, Quality, and Network
Features."
1
14