Setting A Static Ip Address - Cisco SPA 501G Administration Manual

Configuring Security, Quality, and Network Features
Configuring Domain and Internet Settings
STEP 5
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
PPPoE is not applicable to WIP310.
NOTE
Click Submit All Changes.
For the SPA501G, can be configured using the IVR. See the
Cisco SPA 501G IP Phone" section on page

Setting a Static IP Address

If you configured Static IP as the internet connection type:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the System tab.
Configure the following fields:
• Static IP Address—Enter the static IP address of the phone.
• Netmask—Enter the subnet mask of the phone.
• Gateway—Enter the IP address of the gateway.
For the SPA 525G, you also have the following fields available:
• LAN MTU—LAN Maximum Transmission Unit size. Default value: 1500.
• Duplex Mode—Choose one of the following to configure the speed/duplex
for the phone's Ethernet ports:
- Auto
- 10MBps/Duplex
- 10MBps/Half
- 100Mbps/Duplex
- 100MBps/Half
"Using IVR on the
17.
5
122