Ext Tab - Cisco SPA 501G Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference

Ext Tab

Ext Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Shared Held Key List
PSK1 through PSK6
The Ext tabs vary by phone and depend on the number of extensions the phone
model supports.
This section describes the fields for the following Ext tab headings:
• General, page 243
• Share Line Appearance, page 262
• NAT Settings, page 263
• Network Settings, page 263
• SIP Settings, page 264
• Call Feature Settings, page 267
• Proxy and Registration, page 269
Description
Softkeys that display when a call is on hold on a
shared line. See Customizing Phone Softkeys,
page 51 for more information.
To configure a speed dial script, enter the following
in the PSK field:
extensionname
fnc=sd;ext=
extnum name
;nme=
where fnc is the function of the key (speed dial), ext
( extensionname ) is the extension being dialed,
the extension on the calling phone from which the
outbound call is sent, and
speed dial being configured.
To configure an XML script, enter the following in the
PSK field:
scriptURL.xml
fnc=xml;url=http://
where fnc is the function of the key (an XML script),
scriptURL.xml is the URL where the script is located,
scriptname
and is the name of the script.
B
outbound
@$PROXY;vid=
vid
name
is the name of the
scriptname
;nme=
is
261