Welcome Thank you for choosing the Cisco Small Business IP Phone. This guide describes how to install your phone and how to perform some basic tasks. The features available on your phone depend on the type of system to which your phone is connected.
• Using a wireless connection You can use a Cisco WBP54G Wireless-G Bridge with the IP phone to create a wireless connection between the phone and the network. See the WBP54G documentation on www.cisco.com for more information. The ‘Where to go from here’ section contains links to the documentation area on www.
Phone lines and buttons The photo above shows the Cisco SPA509G. Numbered objects in the photo are explained in the following table. (Other models can differ). Phone feature Description Pick up to place or answer a call. Receiver Displays solid red when you have a new voicemail message. Flashes red during an incoming Message waiting call or when the phone’s fi rmware is being updated.
Hold button Press to access a menu to confi gure features and preferences (such as your directory and speed dials), access your call history and set up functions (such as call forwarding). The Cisco SPA501G Set-up button accesses the Interactive Voice Response menu, which allows you to perform tasks like getting the IP address of the phone.
Soft key buttons Button Feature << or >> Move left or right through an entry without deleting characters. Add an entry. Performs a blind call transfer (transferring a call without speaking to the party to whom you are bXfer transferring the call.) cancel Cancels any changes you have made (press before ‘OK’...
To put a call on hold, press the ‘Hold’ button. The caller hears a series of three rapid beeps or music while on hold. To resume the call, press the ﬂ ashing red line button for the call. For the Cisco SPA 502G press the ‘Resume’...