Cisco SPA 501G Administration Manual page 291

Cisco SPA 500 Series and Wireless IP Phone Field Reference
User Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Text Logo
BMP Picture Download
URL
Logo Type
Background Picture
Type
LCD Contrast
Back Light Enable
Back Light Timer (sec)
Description
Text logo to display when the phone boots up. A service
provider, for example, can enter logo text as follows:
•
Up to 2 lines of text
•
Each line must be fewer than 32 characters
•
Insert a new line character (\n) between lines
•
Insert escape code %0a
For example, "Super\n%0aTelecom" will display:
Super
Telecom
For more information, see the
Information and Display Settings" section on page 33.
URL locating the bitmap (.BMP) or .jpg file to display on the
LCD background.
For more information, see the
Information and Display Settings" section on page 33
Select from Default, Download BMP Picture, or Text Logo.
Defaults to Default.
For more information, see the
Information and Display Settings" section on page 33
Select from Default, Download BMP Picture, or None.
Defaults to Default.
For more information, see the
Information and Display Settings" section on page 33.
Enter a number value from 1 to 30. The higher the number,
the greater the contrast on the screen.
Select yes to enable the screen back light.
Enter the number of seconds before the back light should
turn off.
"Configuring Phone
"Configuring Phone
"Configuring Phone
"Configuring Phone
B
.
.
280