Supplementary Services - Cisco SPA 501G Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Call Back Active LED
Trunk In-Use LED
Trunk No Service LED
Trunk Reserved LED

Supplementary Services

Enable or disable the corresponding supplementary services on the phone. A
value of "yes" indicates enabled; "no" indicates disabled.
Parameter
Conference Serv
Attn Transfer Serv
Blind Transfer Serv
DND Serv
Block ANC Serv
Call Back Serv
Description
Call Back operation is currently active on this call
appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=s.
LED pattern that indicates that a shared trunk is in use.
LED pattern that indicates that a shared trunk is not in
service.
LED pattern to indicate that a shared trunk has been
reserved.
Description
Enable/disable Three way conference service.
Defaults to yes.
Enable/disable attended-call-transfer service.
Defaults to yes.
Enable/disable blind-call-transfer service.
Defaults to yes.
Enable/disable do-not-disturb service.
Defaults to yes.
Enable/disable block-anonymous-call service.
Defaults to yes.
Enable/disable call-back (a.k.a. repeating dialing)
service.
Defaults to yes.
B
250