Configuring The Vpn On The Security Appliance; Configuring The Vpn On The Cisco Spa 525G - Cisco SPA 501G Administration Manual

Configuring Security, Quality, and Network Features
Configuring SSL VPN on the Cisco SPA 525G
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
• Video monitoring is not supported.
To configure and use the Cisco SPA 525G on a VPN, you must do the following:
1. Configure the VPN on the VPN server using Cisco AnyConnect VPN client
software.
2. Configure the VPN administrative settings on the Cisco SPA 500 Series IP
phone using the administration web user interface.
3. Configure the VPN user settings on the administration web user interface or on
the IP phone using the phone menu.

Configuring the VPN on the Security Appliance

Specific configuration instructions are not presented in this document. For detailed
instructions for your particular device, see the application notes in the
Business Support Community.
Download the Cisco AnyConnect VPN client software from Cisco.com and install it
on the VPN server.
Download the Cisco IOS version that supports this feature and install it on the VPN
server.
Configure SSL VPN on the VPN server.
Ensure the VPN is functional and you can connect to the VPN using the Cisco
AnyConnect VPN client.

Configuring the VPN on the Cisco SPA 525G

SPCP Settings (Optional)
If the phone will be connecting to the VPN using SPCP, configure these
administrative settings using the web administration interface:
Log in to the web administration interface.
Click the System tab.
5
Cisco Small
128