Configuring Pppoe Settings (Cisco Spa 525G/525G2 Only); Setting Optional Network Parameters - Cisco SPA 525G2 Administration Manual

Configuring Security, Quality, and Network Features

Setting Optional Network Parameters

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Setting Optional Network Parameters
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide

Configuring PPPoE Settings (Cisco SPA 525G/525G2 only)

If you configured PPPoE as the internet connection type:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the System tab.
Configure the following fields:
Parameter
PPPoE Login Name
PPPoE Login Password
PPPoE Service Name
Click Submit All Changes.
Log in to the configuration utility.
Click Admin Login and advanced.
Click the System tab.
Configure the following fields:
Parameter
Host Name
Description
Specifies the account name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Description
The host name of the phone.
5
131