Configuring Lines and Extensions
Configuring Extensions
STEP 5
Configuring Extensions
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameters
Registering LED
Call Back Active LED
Click Submit All Changes.
For more information on LEDs, see the
page
191.
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Ext <number> tab for the extension you want to configure.
In the General section, make sure that Line Enable is set to yes.
Description
Appears when the corresponding extension tries to register
with the proxy server.
Defaults to blanks (c=r;p=s).
Indicates Call Back operation is currently active on this call.
Defaults to blank (c=r;p=s).
"Creating an LED Script" section on
2
31