Cisco SPA 501G Administration Manual page 23

Getting Started
Using the Web Administration User Interface
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
If your service provider disabled access to the web UI, you must contact the
service provider.
If you have trouble accessing the web interface, perform the following steps:
Cisco SPA 502G, Cisco SPA 504G, Cisco SPA 508G, Cisco SPA 509G:
Press the Setup button on the phone.
Select Network.
Scroll to Enable Web Server and make sure that it is set to Yes. If not, press the
Edit soft key and press y/n soft key to set it to Yes.
Press OK, then press Save.
Cisco SPA 501G:
Press the Setup button on the phone.
In the IVR menu, enter 7932.
Press 1 to enable the web server, then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
WIP310:
In the Home screen, press the Select button to choose Settings.
Press the Select button again to reach the Settings menu.
Scroll to highlight Misc Settings
Press the left arrow to ensure that Enable Web Server is set to On.
Press the Select button to save this setting.
and press the Select button.
1
12