Upgrading Firmware; Determining The Current Firmware Version; Cisco Spa 500 Series And Wip310 Ip Phone Administration Guide - Cisco SPA 501G Administration Manual

Getting Started

Upgrading Firmware

Upgrading Firmware
STEP 1
STEP 2

Cisco SPA 500 Series and WIP310 IP Phone Administration Guide

Phones should be upgraded to the latest firmware before using any administration
features. There are various ways to upgrade your firmware:
All Phones
• Cisco SPA 9000 Voice System Setup Wizard—If you are using the Cisco
SPA 500 Series and Wireless-G IP Phones with a Cisco SPA 9000, you can
use the Cisco SPA 9000 Voice System Setup Wizard to upgrade your
phones. See the
• Autoprovisioning—A configuration file that includes upgrade information is
downloaded by a user's phone when it is powered on. See the
Resyncing, and Rebooting Phones" section on page
Cisco SPA 50XG and WIP310
• Firmware Upgrade Executable File (Cisco SPA 50X or WIP310)—Download
the firmware upgrade utility from the product page on
PC desktop and run the upgrade from your PC by double-clicking the
executable file. Your computer must be on the same network as the Cisco
SPA 500 Series and Wireless-G IP Phone.
Cisco SPA 525G
• Web Interface (Cisco SPA 525G)—You can download the latest firmware
onto your PC desktop and use the web interface to upgrade your firmware.
WIP310
• TFTP/HTTP server—The latest firmware image file is loaded onto an HTTP/
TFTP server and is accessed by a web browser. See the
User Guide
for more information.

Determining the Current Firmware Version

Before upgrading, determine the current firmware version:
Cisco SPA 501G:
Press the Setup button.
In the IVR menu, enter 150, then press #. The firmware version is recited.
Cisco SPA 9000 Voice System Setup Wizard User Guide
1
.
"Upgrading,
137.
Cisco.com to your
Cisco WIP310
7