Figure 26. Lifting The Processor Socket Handle; Figure 27. Installing The Processor - Intel SERVER SYSTEM SR2500AL User Manual

3. Disconnect the AC power cord(s) from the server.
4. Remove the server's cover. See the documentation that came with your server
chassis for instructions on removing the server's cover.
5. Locate the processor socket and raise the socket handle completely (see
6. Raise the CPU load plate (see
Note: Do not touch the socket pins; they are very sensitive and easily damaged.
7. Line up the alignment marks on the processor and the socket, and insert the
processor into the socket.
Note: Make sure the alignment triangle mark and the alignment triangle cutout align correctly.
8. Remove the protective socket cover (see
Note: Retain the protective socket cover for use when removing a processor that will not be
replaced.
38

Figure 26. Lifting the Processor Socket Handle

Figure
A

Figure 27. Installing the Processor

TP02074
27).
B
Figure 28).
Intel® Server System SR2500AL User's Guide
Figure 26).
TP02075